The BCN Twin x Max | 6'2"

· FEATURES ·

· Model: BCN Twin x Max

· Size: 6'2" x 20 x 2 5/8 x 33,5L

· Ref. BCNTWIN62

· Handshaped by Max Stewart

· Built in in Brookfield, Sydney, Australia

· Construction: Pe (Polyurethane Foam + Epoxy resin)

· Finish: Sanded

· Fin system: Bonzer 5FIN

> Fin Not Included!!

· Recommended fins: Chris Christenson Twin FCS | FCS II Power Twin.

Eye Simmetry Surfboards at Pukas Surf Shop

Eye Symmetry Surfboards Collection available at shop.pukassurf.com.

The BCN Twin. All About Simplicity

This model is a spin from the older thruster version of it. Max Stewart transformed it into a twin fin. This one is gonna be the signature twin fin model alongside with the Pam Pam for Eye Symmetry Surfboards.

This design looks similar to the thruster but the main difference is that this one is a bit flatter and has a little bit more V on the back on the tail. The volume has been pushed forward, just like in the Pam Pam model. It still got the volume forward on the deck of the board, and the outline is pretty pushed forward too. Overall, it has a simple outline. As Max says himself, "there is nothing too crazy going on."

The rails are a bit lower than what Max uses in a short board originally; they are also a little bit more refined. Being a twin fin, it is a little bit less whole so Max is looking to get a little bit more control from that area of the board. The rail, the reduced tail, outline, volume and the V, are just gonna slow the board a bit down which will be giving the surfer a bit more control.

Pukas Surf Shop Eye Symmetry BCN TWIN

· CONCAVES PATTERN ·

This design has a similar concave to the Pam Pam surfboard. A four concave entry with a little bit more double and a quite bit more V than the Pam Pam. It is everything very subtle but it will offer a more controlled ride.

Pretty low rails, pretty pulled in tail not too fat, two fins, V…

Eye Simmetry Surfboards at Pukas Surf Shop

Eye Symmetry Surfboards Collection with Max Stewart. Available at shop.pukassurf.com.

Let's remind you the concaves on the Pam Pam so you can really understand how these are slightly different:

· Bottom concave | This concave is not crazy. It has a very subtle four concave entry that can be really felt with your hands but are barely noticeable to the eye due to the extreme and delicate craftsmanship behind this design.

The four entry concave breaks up the water. In one hand, if you got one single concave, it can stick on turns and stay like that sometimes. On the other hand, a V entry can make the board more loose. So the Pam Pam's design is in between those two. This is something that Max does on most his surfboards designs.

· Single Double Concave | A really subtle single with double concave follow the four entry concave, so this board is gonna be for small waves. Max doesn't one a slow one so we’ve got a single concave that lifts the board above the water and makes it go fast in small waves. Under the front foot, the belly of the board, just transfer pressure if you want speed. Following this action, the board lifts and responses, gives you speed.

· Double to a bit of V | The back of the board finished with a double concave to a bit of V. Max wants the back of the board really loose. The V is the opposite of a concave, so it makes the board really easy to maneuver and turn.

· CONSTRUCTION. BEHING THE SCENES OF STRENGTH ·

Pukas Surf Shop Eye Symmetry BCN TWIN

Let's go see the construction process step by step:

· Blank | Choosing the blank, the foam is key for a high quality surfboard and this one has a winner. Max always starts with a regular, really high quality blank from Surfblanks Australia. This translates into a very strong, very light, and with a really tight cell structure PU.

· Resin | The resin used for Eye Symmetry Surfboards is the epoxy resin.

· Stringer | Red cedar stringer, always a great choice for consistency in quality and looks.

· Color Work | It's done with tints in the glass. Pigments are added into the tint to obtain the different colors. The boards are glassed with color, finished with white marble spray and added a final clear epoxy resin.

· Glass Work | Max is an absolute expert on glassing. These are double glassed. But no, the surfboards are not heavy. Why? Let's go for it:

> 2oz. glass in the bottom, obviously it is the half of the regular 4oz. glass that it is used to glass a board with

> After, Max tights pop and glasses the 4 oz. wavy patches that you can see on the top of the board. The function of the patches will help you pull the weight back because without them, the board would feel a bit nose heavy. So, in order to offset that and to stop it from interfering with surfing, Max pulls the weight to the back of the board. This helps to balance the surfboard.

> Another 2oz. glass goes on the deck, spray the white marble finish and then clear 2oz glass again.

Three Features: Strength, Weight Distribution and Looks

Eye Symmetry Surfboards Collection with Max Stewart. Available at shop.pukassurf.com.

· SURF SKILLS & A BIT MORE ·

· Surfer Skills | Recommended for medium to advanced surfers. For those who know how to surf and surfs good. Someone that has the knowledge and is pretty skilled surfer, would even be able to surf this board on pretty big surf. He needs to know how to move not aggressively with the board; meaning, being able to work with the board.

This board is perfect for a flowy, drivy kind of style. It asks for a bit of a wave, a bit of size and push, like a point break or a beach break that has a bit of power, and a bit of length. With a twin fin you want a bit of room to move on the wave face too!

· Recommended Fins | Your are looking for a pretty upright fin but not a keel and not a super upright. We are looking for something in between, like a Chris Christenson Twin FCS or the FCS II Power Twin.

A Complex Yet Satisfying Balanced Flavor

Eye Simmetry Surfboards at Pukas Surf Shop

Eye Symmetry Surfboards Collection available at shop.pukassurf.com.

Max Stewart, the Artist Behind the Beautiful Complexity of Eye Simmetry Surfboards

Eye Simmetry Surfboards at Pukas Surf Shop

Eye Symmetry Surfboards founder, artist and expert glasser, Max Stewart.

31 year-old Australian Max Stewart is the artist, expert glasser, designer and the man behind Eye Symmetry Surfboards.

This young man from Manly, Sydney has been doing surfboards since the young age of 18 years old. Eye Symmetry Surfboards is already 10 years old. The first board for Pukas was build in 2016 and that is when it all started and, as Max says, "we are still dancing!."

When asked about why build surfboards, Max has it very clear. He has always like to build staff with his own hands and was into surfing so, it was natural for him to blend the two things together.

Before building boards he was actually fixing and repairing shoes! Something he loved to do. But as he got tired of it, he really wanted to build surfboards. He started doing a couple of boards in his back yard and soon enough he thought that it was time to start taking this "job" thing seriously. He started and kept knocking on different doors until he had his first big opportunity when he arrived to Hayden Shapes doors in Sydney. He chased down the manage of that and then got the job going from zero to the best in the factory in only three years. That was the moment he decided that he was hitting his head against the roof. It was time to do his own thing and fly solo.

· WHY THE LIKING AND EXPERTISE ON EPOXY RESIN? ·

On Maxes words, "that started because I was bread into it in Hayden Shapes." Around ten years ago, the market was moving into epoxy; that it was when epoxy started to kick. No-one wanted to touch it before that. For Max is epoxy because he knows it very well; he is used to it and considers it’s better material, more strong, more white, and, the boards last longer.

Even though it is a superior material, it is hard to manufacture and more painful to work with. It’s easy to have problems with glassing so shapers usually prefer to stay away from it. It is a lot of monitoring; needs a lot of patience and a very specific skills to work with it. It is very hard to find people that are willing to be patience and have the specific skill. This is the reason why Max set up his own factory and they do everything in house: The Eye Symmetry Surfboards house.

Max puts his skills, hard work, and intuition into a product that he desires people to enjoy. That’s what keeps driving him.

Eye SImmetry Surfboards at Pukas Surf Shop

HAYDENSAHPES - 6´0 - HYPTO KRYPTO SOFT - Kelp

You may also like

You may also like